ENVELOPE IMAGER CS DRIVER DOWNLOAD

Orientation should always be set to Portrait. Check separation adjus Damaged media, such a dog-eared turn-up or turned-down corn Media that is not stiff enough may not be usable. Blurry address Image is not sharp Replace the inkjet cartridge or change the printer resolutio Split line of type Misalignment between top and bottom parts of an address line Reposition the text in the layout. Paper is jammed in the printer. Colors are printed in grayscale. Wait for printer to finish.

Uploader: Kajigis
Date Added: 2 August 2010
File Size: 43.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86767
Price: Free* [*Free Regsitration Required]

Interference or bad data cable connection. Paper LED flashes Add paper or readjust sheet separation. Colors print normally color mixing.

Check separation adjus Damaged media, such a dog-eared turn-up or turned-down corn Media that is not stiff enough may not be usable. Orientation should always be set to Portrait.

Envelope Imager CS

Rear Paper Support — Provides the proper angle to enhance pa 7. Close the software and then turn Printer of and on. Open the top cover on the printer. Remove cartridge s and check to be sure sealing tape was re Check that the correct cartridge s were installed.

  56K PCI VOICE MODEM SF-1156IV R9A DRIVER

Remove and reinsert the cartridge into the imxger holder.

Install a new print cartridge. Press the Soft Power button to turn off the printer, and the If the problem persists, turn the printer off and on again, Resend the print job. Turn the printer off using the Main Power switch.

Send your print job. Improperly installed cartridge s or wrong print cartridge i Open the top cover on the printer.

Rena Envelope Imager CS M User Manual – Page 1 of 35 |

Wrong interface settings Static electricity Check driver selection. Close the top cover on the printer. Replace the ink cartridge Cartridge will not print Sheet is blank even after it has gone underneath cartridge s Check to make sure the tape is off the printhead. Remove any paper obstructions from the printer. Turn the printer off, then on again, using the Soft Power bu Open the top cover on the printer. Install the Inkjet Cartridges Set up the feed on the printer Plug in the printer and connect it to the computer Install the Printer Driver.

Covers enclose hazardous parts that s This machine requires periodic maintenance. Resend the print job. Print too light or missing character dots Clogged or dirty printheads Running out of ink Replace inkjet cartridges.

  CTL 7GX DRIVER DOWNLOAD

Click on File, Print. The paper width does not match the paper siz Do one of the following: Fixed Side Guide — The paper is registered against this guid 5. If the LED remains on, turn the printer off and on using the Continued on next page. Blurry address Image is not sharp Replace the inkjet cartridge or change the printer resolutio Split line of type Misalignment between top and bottom parts of an address line Reposition the text in the layout.

Adjust margin setting in layout software. Insert a new Print Cartridge. No communication Wrong driver or port selected. Adjustable Side Guide — Holds the paper against the fixed si 4. Printer is powered on.

Turn the printer on using the Main Power switch. Not printing on media Media not passing through paper sensor.